Alienware Area 51 part

STEE

New Member
Joined
Jul 9, 2013
Messages
3
Hi all, Just looking for a bit of help. I recently bought a Alienware Area 51 ALX case w/ power supply and original fans from Ebay. When I got it I opened the case up to look inside and a cable got snagged on the bottom of the case on the part in the picture. It pulled one of the pins out of place its a bit bent. Thing is I do not know the name of this part I think I might need to replace it. Can anyone tell me the name of the part and where I could a replacement. Heres
w9ifkp.jpg
http://forums.overclockers.com.au/s...3c5073e1ac18c7086a4ff&p=11865689&postcount=10
 
Last edited:

Eakers

Member
Joined
Jul 3, 2016
Messages
72
Hello, the only way to get this is to buy old cases, for spare parts. I personally own a few spare cases and they come in handy.

2 of my pins are bent on my board, but still make contact and work. Have you tried to bend them to match the others?
 

jayhernandez7

Member
Joined
Jun 26, 2013
Messages
226
@Eakers is correct, you'll have to piece together a complete build from other cases as they don't manufacture these parts now.
 
Top