Area 51R1 parts for sale

LukeG310

Member
Apr 12, 2018
96
22
These are fully working components of an Area 51R1 that got replaced with newer hardware. You are getting a complete computer except for the Case. Selling all together as a bundle for $265 locally to Los Angeles area. I can ship also but not sure of the cost due to the PSU being heavy.



25572558
Data Sheet

PROCESSOR: I7-960

CPU COOLER: DELL/ALIENWARE A51 120MM AIO x 2

MOTHERBOARD: DELL/ALIENWARE

DVD DRIVE: DVD+-RW SATA DRIVE

RAM: 6GB DDR3 1333mhz

GPU: Radeon HD 6950 x 2 (Crossfire Mode)

PSU: 1000Watt Dell
 

Allen25151

Member
Jun 27, 2016
39
20
Have seen the photo before. Don't have that extender. Looks like newer Aurora. The ones I have are part of the OEM power supply case harness with Red and Black wire with small two pin connector to the lighting board. I do not have a photo handy right now. I was looking for that small connector to make a feed like you need for a power supply change not OEM. Is on a list and not sourced yet. How about Cass-Ole for a source of connector and cable? The connector in photo you have might work if wire length and connector is correct or change the two pin end. Is it from the newest Aurora series? Might be too short but don't have one to check.
 

Allen25151

Member
Jun 27, 2016
39
20

Attachments

  • s-l1600_(11)[1].jpg
    s-l1600_(11)[1].jpg
    99.7 KB · Views: 6
  • s-l1600 (8).jpg
    s-l1600 (8).jpg
    67.7 KB · Views: 6
  • s-l1600 (4).jpg
    s-l1600 (4).jpg
    112.7 KB · Views: 4
  • s-l1600 (3).jpg
    s-l1600 (3).jpg
    107.9 KB · Views: 4

Allen25151

Member
Jun 27, 2016
39
20
Looked over the A51 photos. Will be a couple of weeks and think we can do something on case. Numbers in line with the extras you mentioned. Contact you about it later. I will also get a power cable out and send photos to show the setup. Thanks
 

Allen25151

Member
Jun 27, 2016
39
20
Hi, photos of lighting board feed from ATX 24 connector. Wire length is 16". Checked video card fan wires for small 2 pin connector. No match yet. Need to find source for the small connector. I don't have any bad harness donors to rob that cable from. Did you try Cass-Ole for a source?
 

Attachments

  • 101_0886.JPG
    101_0886.JPG
    138.1 KB · Views: 6
  • 101_0887.JPG
    101_0887.JPG
    153.2 KB · Views: 4
  • 101_0895.JPG
    101_0895.JPG
    122.2 KB · Views: 6
  • 101_0898.JPG
    101_0898.JPG
    154.2 KB · Views: 6
  • 101_0900.JPG
    101_0900.JPG
    170.2 KB · Views: 5