Aurora R4 will not boot. No BIOS display. Constant beep

markthorpe

New Member
Joined
Aug 25, 2014
Messages
1
Hello there,
On power up, my Aurora R4 does not boot any longer (bought in 2011). Nothing on the display and a constant beep (1 beep, 1 second pause, 1 beep) until powered off again.
Replaced CMOS battery
Reset BIOS with jumper
Removed/reseated/moved memory
Removed all SATA plugs, drives
Moved Graphics card to new slot
Unplugged all peripherals
Any ideas anyone ?
Thanks,
Mark
 

MrPicles

Member
Joined
Jun 11, 2014
Messages
12
I think your graphic card died(black screen/no image). Can you open BIOS? cuz after reset if BIOS all settings set to default and your hard drive settings might change from AHCI to RAID or other way around. Usually if this is the case your pc cant boot or recognize the hard drives.
 
Top