finally gettting my numbers up there another b/m score for yahttp://www.3dmark.com/3dm11/7466097
high dollar gpu is paying off
- Thread starter holeyguy66
- Start date
my monitors or only 1440x900 each. i will evetually move to 1080p or high monitors. just have other things to spend money on right now. but if you look on 3dmark mainly all the people are using 1080 and higher. the scores you wanna look for though are the ones that have future mark approved drivers. we all know that the professionals dont use regular drivers.
- - - - - Updated; Consecutive Post Auto Merged - - - - -
actually that link was over clock. the ram is at 1600 or supposed to be. everytime i boot up or change an oc profile it goes back to 1333. i dunno if thats a default setting on the mobo or i got some ramm going bad. i ran another after that onehttp://www.3dmark.com/3dm11/7466238 after that i oc to 4.4 and they started dropping. so i cant increase the cpu voltage at 4.4 with out dropping in score. im learning though
Ah ok my mistake. I knew you had surround just wasn't sure of the res.
You could also try downsampling, that'll increase your res. My friend has a 1080p monitor, I set it up to display 1440p (useful only in games) he can now turn off all aa settings. I can go all the way to 4k on mine, but I take a huge fps hit and have to lower to 60hz.
tappin from my Nexus 4
You could also try downsampling, that'll increase your res. My friend has a 1080p monitor, I set it up to display 1440p (useful only in games) he can now turn off all aa settings. I can go all the way to 4k on mine, but I take a huge fps hit and have to lower to 60hz.
tappin from my Nexus 4
i dunno where that setting is or what it even does lol. im just happry to be running at maxed settings at 4320x900. bf3 easy 75-100 frames fc3 a little tougher but get 60-90 frames.
- - - - - Updated; Consecutive Post Auto Merged - - - - -
- - - - - Updated; Consecutive Post Auto Merged - - - - -
http://www.3dmark.com/3dm11/7468337 and another 4.4 on the cpu at 1.325 volts and +25MHz on the gpu offset and 101 MHz offset on memory. with a power target of 106% and a temp target of 60 degrees.
- - - - - Updated; Consecutive Post Auto Merged - - - - -
and sway yes i have 1080p scores atleast thats the extreme setting. http://www.3dmark.com/3dm11/7386433
http://www.3dmark.com/3dm11/7386773
- - - - - Updated; Consecutive Post Auto Merged - - - - -
yea the titan has been over clocked i just have to findout what goes into over clocking it. the last score i had an oc of 101 MHz on the memory and like 50 ish on the gpu. and ya i know i just havent done it yet. and just eyefinity just as a certain ring over surroundI have a lot to learn with it too.
Have you OC'd the Titan?
My RAM recently started defaulting to 1333 too and it turned out to be bad RAM so you could have a similar problem.
Time to change your Eyefinity sig!
- - - - - Updated; Consecutive Post Auto Merged - - - - -
http://www.3dmark.com/3dm11/7468337 and another 4.4 on the cpu at 1.325 volts and +25MHz on the gpu offset and 101 MHz offset on memory. with a power target of 106% and a temp target of 60 degrees.
- - - - - Updated; Consecutive Post Auto Merged - - - - -
and sway yes i have 1080p scores atleast thats the extreme setting. http://www.3dmark.com/3dm11/7386433
http://www.3dmark.com/3dm11/7386773
Last edited: