Memory Upgrade Issue

[thanatos_mb]

Hi,

I recently got 24 gb GSkill ripsaw RAM @ 1600mhz. But i am getting bluescreen. I am doing something wrong in BIOS. Can someone explain me how to configure BIOS for these rams step by step?


Thanks

 

[yikes81]

Do a mem test. Also you can try swapping the RAM sticks around.

 

[DDuB420]

I would try to reseat the ram again, could be a bad connection in the slot

 

[AeonSoul]

Also, check if the timings in the BIOS are the same as the ones reccomended by the manufacturer.

 

[MattyB]

You can also try a PreBoot test. I think you press F12 while it's booting (instead of F2 for BIOS). This will test all your hardware for you.

 

[TRevor]

i upgraded the ram as well not getting blue screen but im getting frame drops i used to play at 60 fps and now im playing at 30-45 fps i got the hyper x 2x8 set and i had the 8gb factory set what am i doing wrong and i went on to the cpu-z and i said 1600 and i was at 800 each meaning 1600 and i have done a mem test as well